ADDONICS TECHNOLOGIES
ADS3GX4R5-MLM (Multilane 4X PCI-X Controller For Mac)
Addonics ADS3GX4R5-MLM Macintosh Instructions
The ADS3GX4R5-MLM has been tested on a PowerMac G5 Dual 2.0
GHz model with PCI-X slots and on a PowerMac G4 with PCI slots.
Mac OS X 10.4.x or later is required for the driver to work properly.
Hardware Install:
1. Turn the PowerMac G4 or G5 off and disconnect all cables.
2. Make sure that you are grounded to avoid static electricity.
3. Open the PowerMac G4 or G5.
4. Install the ADS3GX4R5-MLM in an open PCI or PCI-X slot.
5. Secure the bracket with a screw.
6. Close the PowerMac G4 or G5 and reconnect the cables.
7. Turn on the computer.
Software Driver Install:
1. Copy the SiI3124_2.0.3_Sil_Pkg from the CD to your hard drive.
2. Decompress the zip file by double clicking on it.
3. Launch the SiI3124_2.0.3_Sil_Pkg.
Setup
When you first purchase and install a new hard that is attached to the
ADS3GX4R5-MLM host adapter, you will need to format the hard
drive using the erase tab in Disk Utility. Disk Utility can be found in
the Mac OS X “Utility” folder. Once you have erased the new hard
drive it will mount on the desktop and be ready for use. You can also
create RAIDs using Disk Utility with the hard drives mounted in your
SATA enclosure.
Addonics Technologies
2466 Kruse Drive
San Jose, CA 95131
Phone: 408 433-3899
Fax: 408 433-3898
Technical Support (8:30 am to 5:30 pm PST)
Phone: 408 433-3855
Email: Techinfo@addonics.com
|
GE 27906 User Manual
Gateway FPD2275W User Manual
Fagor America VFA 70 S User Manual
Electrolux 922177 User Manual
Dialogic DISI32 EW User Manual
BT Synergy 2110 User Manual
Behringer PMX1000 User Manual
Asus Computer Hardware P4P800SE User Manual
Actiontec electronic 56K User Manual
Acer TravelMate 2400 User Manual